Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wildman Punisher 2200 (3 inch minimum dia. build)
#21
Thanks Greg.


Post build/flight notes:

I meant to post this during the build but lost track of the photos.  I used coupler tube to give me double wall thickness from the forward end of the motor to the bottom of the AV-bay.  The purpose here is to minimize the risk of the body  tube folding forward of the motor, on high speed flights such as this. I bought 3 inch coupler tube from Wildman and cut it down. 

For motor retention I friction fit with blue painters tape with strips running the length of the motor.

Additionally, for internal AV-bay pics, see the 3 inch MD build thread on here for the M2245 motor I did last year.  I've recycled this sled and electronics for three minimum diameter flights so far. It was kind of  a quick and dirty design at the time, but it gets the job done.


Attached Files Thumbnail(s)
       
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)