Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Scratch built 38mm rocket
#1
As you may or may not be able to tell from the title of the thread, I do not have a name for this rocket.  But I will be attempting to build my first, non MD, scratch built high power rocket! This design originally started life as a two stage rocket I almost built but I then adapted it as a contest entry for AMW's Red Rhino contest they held a while back. Any and all name suggestions will be greatly appreciated.

The rocket in question will be 38mm fiberglass utilizing one of the CTI polycarbonate nose cones and a 29mm motor mount. For now it will be single deploy but in time I will build an Av-bay and payload section so I can fly it on some of the CTI 6XL Is.

Once I get back to my desktop I'll throw in a screen shot of the OR model so everyone can see what it will look like.

In the mean time, let's get into the build.

I decided to start with the motor mount. I used JB weld to bond the aeropack and centering rings on.
   

I've also slotted the body tube. I'm going to bond the fins to the motor mount before I put the motor into the body tube.

   

NAR# 98194
Level 1: CTI I-216, 3,043'
Level 2: CTI K-740, 5,999'

Personal altitude record: 12,400' CTI L395
2014 total impulse: 9,018.2 Ns (76% M)
2015 total impulse: 7,171.7 Ns (40% M)
2016 total impulse: 18,664.2 Ns (91% N)
2017 total impulse: 8,281.1 Ns (80% M)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)