Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AMW Red Max Build
#31
Edit: After some file size upload errors, it appears the errors I was getting are gone.  Here is the fin can after removing from the bag.  There are a few wrinkles in the fiberglass layer, but otherwise it looks pretty good.   After sanding the fins, I will probably go with clear on the fin section and paint the rest black.  


Attached Files Thumbnail(s)
               
Reply
#32
Here is the nosecone electronics section set-up. It is pretty much the same as the one in my Estes MDRM, in the build linked at the top of this thread.  Most of these parts were recycled 54mm motor mount parts from the AMW DRM kit.   I turned and tapped a piece of aluminum stock to hold the threaded rod.  The aluminum round stock will be embedded in about 1 lb. of BBs and epoxy, to adjust the CG forward. The electronics sled will go on the central threaded rod.  I still need to add charge holders to the bulkhead.


Attached Files Thumbnail(s)
                       
Reply
#33
Man that’s one clean looking electronics bay! 👍🏻
Reply
#34
Shocked 
(04-30-2018, 01:55 PM)IndianaSteve Wrote: Man that’s one clean looking electronics bay! 👍🏻

Thanks, but that's only because it's empty. Smile Once I put the electronics in it will be a rat's nest of wires.

I don't have much left to do on this except finishing.  A launch with a decent waiver would motivate me to finish it but it doesn't look like I'll be able to make any launch events for the next couple months, so this will probably see no updates until it gets launched.
Reply
#35
I can for sure understand the motivation part. I am trying to at least get my L1 build in primer so I can get a test flight in at this weekends launch. That is if my One Bad hawk harness comes in time lol.
One of these days we will get in to the high fliers and take advantage of our clubs standing 10k and 15k call in wavers!!
Reply
#36
I put together a 98/75 mm adapter. First flight should be on an Aerotech K1499. Coming this summer to a launch near you!


Attached Files Thumbnail(s)
       
Reply
#37
That should be an awesome flight! Hopefully you will get video 😁
Reply
#38
The pumpkins are upon us, and the primer went like this:


Attached Files Thumbnail(s)
       
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)